10 Inch Beer Filtering System - Keg to Keg
KL02042
This beer filter is designed to be used with our Absolute 1 Micron Filter. This filter works best when used as the middle man when transferring icy cold (-1°C) uncarbonated beer between two kegs.
Features:
- Clear high pressure housing
- Purge valve to expel air pockets
- ½” BSP inlet and outlet
- Includes brass ball valve
- Brass threaded ports for durability
- Compatible with other 10” filter systems
If you drink with your eyes, and prefer a crystal clear beer, then this really is the cheapest method to getting crystal clear beer with little to no effort.
NOTE: Hot liquids exceeding 50°C should not be used in direct contact with the filter housing. Do not use this filter on unrestricted mains water pressure exceeding 70 psi.
*please note Absolute 1 Micron Filter shown in picture does not come with the System, that is an additional purchase.*
This system comes with 9.5mm duotight fittings:
1 x KL06927 duotight - 9.5mm (3/8”) Female x 1/2 Male Thread
1 x KL07375 duotight - 9.5mm (3/8”) Female x 1/2'' Male Thread Ball Valve
Recommended accessories purchases:
KL02059 - 1 Micron Absolute Reinforced Washable Cartridge
If you do not have any 9.5mm OD push fit compatible hosing, see below:
KL06248 - EVA Barrier 6.5mm ID x 9.5mm OD line
2 x KL20763 - duotight 9.5mm (3/8) x Ball Lock Disconnect - (Black + Yellow Liquid)
This filter works best when used as the middle man when transferring icy cold (-1°C) uncarbonated beer between two kegs. All you will need to do is purchase some hosing, clamps, ball locks and an Absolute 1 Micron Filter to use this system.
This filter can also be used to filter our yeast in your distillation wash. By removing yeast before you put your wash into your boiler this will significantly improve the quality of your final spirit.
Many off flavours in distillation can come from boiling yeast cells. When the yeast cells get boiled they break open releasing many off flavours aromas and fusil oils.
Overall rating: 4.6896553 / 5 from 29 reviews.
Review topics: ["price","works","beer","filter","crash","water"].
"I was using Campden tablets before purchasing this Beer filter combined with the 'Pure Coconut Carbon Block Water Filter 5 Micron'. Since filtering my brewing water from the tap, the quality of my beer has improved by an order of magnitude. Its sooooooooo much better! I wish I bought this with the Brewzilla. Its worth the $50 or so to get all the bits needed to easily filter your brewing water. Do it, you wont look back."
"Works great but i need a new seal for the housing any one no where i can get one."
"Works perfectly"
"Asked for advice on what was best filter option for my fruit syrup. Got this housing with washable filter & 25W pump. It didn't work, pump & filter couldn't handle the viscosity."
"Worked perfectly"
"Unused as yet looks to be good construction and solid"
"Not sure if it was meant to have only 1 or 2 o ring seals for the two connectors. Used a spare o ring for a corny post to stop it leaking"
"Ordered the 10” beer filtering kit and a coconut nut carbon filter. Both suit my needs"
"I use it to filter yeast out while transferring to another container. Works well!!!"
"I am happy with all my products from Kegland, great prices too."
