HSS Step Stepped Drill Bit 4mm-22mm.
"Great produce did the job with ease. Easy to order and fast delivery."
HSS Step Stepped Drill Bit 4mm-22mm
$5.95
Sale price
$5.95
Regular price
Skip to product information
In stock
HSS Step Stepped Drill Bit 4mm-22mm
KL09447
$5.95
Sale price
$5.95
Regular price
Drill Speed: 200-800 RPM
Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm.
Coating: Titanium Nitride Coating
Suitable for: Metal, wood, plastic
Tip: Self starting tip (no pilot hole required or center punch)
These High Speed Steel (HSS) drill bits are ideal to drill stainless pots, kegs and other products.
This particular size is ideal as you can drill hole sizes up to 20mm which is perfect for 1/2inch threaded products that are common in the home brewing industry and it can also drill hole sizes up to 22mm which is perfect for 5/8inch products such as tap shanks.
This bit can also be used to drill pilot holes for the range of hole punches that we sell separately.
For best results in stainless steel or metal make sure to drill slowly (less than 600prm). Use significant pressure when drilling and also use cutting lubricant to lubricate the cut but also keep the bit and metal that you are cutting cold.
NOTE: If fast drill speeds are used the metal and bit will heat up and the bit will loose it's hardness and not last as long.
If you want to see how to use this product you can see it featured in this video below:
You may also like
Overall rating: 4.857143 / 5 from 14 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["works"].
Review highlights
Reviews
Good drill
"Works very well. Able to drill until correct hole size achieved."
Great drill but
"Great stepped drill bit. Perfect for all sorts of jobs around the brew shed"
Works as intended
"Bought this to install a third tap in my kegerator tower. Only reason i give it 4 stars is that its not wide enough for NukaTap Shank. The shank is 23mm-24mm where the only step drill bit option is to 22mm."
Better than the Bunnings one!
"with a pilot hole it worked well with light 304 stainless when I was making my mash cap"
Works well.
"No problem drilling 12mm pilot hole for the hole punch. Into SS fermenter lid, no pilot hole, minimal heat."
"Prompt delivery and friendly service."
Stepped Drill Bit
"Pretty good, but one section did burn out pretty quick. I've drilled to holes in my 2 kegmenters for the thermowells."
HSS Step Stepped Drill bit
"Works well and at a good price."
Sharp as
"Sharp as"