This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight.

Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long

$1.95
$1.95
Skip to product information
This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight.
  • This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight.
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight.
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
  • Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long - KegLand
Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long

Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long

KL18012

$1.95
$1.95
In stock
Volume pricing
1+ $1.95/ea
10+ $1.20/ea

This is made from rigid 8mm OD and 6mm ID polypropylene. Used to join duotight fittings together when you need a straight join.


This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight.

Although it's possible to make joins using short pieces of 8mm OD Evabarrier 5mm Beer Line this is far more flexible and when mounting parts to a gas board or wall its will often make things much neater if you use these instead.

The 50mm length is long enough so even after pushing right into two duotight 8mm fittings on both ends you should still have a exposed length of about 3mm so you can still relatively easily take the fittings apart later.
Product Downloads
Generation 2 duotight Design Revision

You may also like

Overall rating: 4.923077 / 5 from 13 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["service"].

Review highlights

Reviews

Easy to use

"Easy to use"

— Kym W. (5/5)

Handy joiner for my regulator rack

"I could have cut and shut pieces of tube but these were all uniform and just made the job easier"

— Kent D. (5/5)

Rigid joiner

"I haven't had a leak since ive installed these"

— David R. (5/5)

Great for putting a gas board together

"You can always cut your own tubing, but these little joiners have a fantastic fit and not had a leak since I changed my tubing over, very satisfied."

— Terry E. (5/5)

Better than cutting tube.

"Offers a better connection than cutting line as it's solid and hard. Hasn't leaked in months."

— Jarrod G. (5/5)

Plastic Joiner

"Works a treat on my picnic tap to Duotight ball lock , Thansk Kegland fro great service and prompt delivery"

— John N. (5/5)

"All good"

— Bruce (5/5)

Good Quality

"Its tube"

— Nathan C. (5/5)

Man these things are handy!

"I keep a big bag of these on hand. To be completely honest, they can be harder to get out of the connectors than non-rigid tubing. But their structural support is often very nice to work with."

— Matt C. (5/5)

Fine

"Fine"

— Nathan B. (4/5)

Q&A