So handy to clean kettle and fermenters
"Handy CIP to clean kettle and fermenters quick and easy"
Little Red Spitfire - Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb )
$9.95 AUD
Skip to product information
In stock
Little Red Spitfire - Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb )
KL04329
$9.95 AUD
Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.
- Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)
What can it do?
- Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to.
Specification
1 x Custom molded rotating spray head with 1/2" BSP thread
1 x 300mm length silicon tubing suitable for your BrewZilla recirculation arm
1 x Stainless nut and barb
Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.
You may also like
Overall rating: 4.8 / 5 from 50 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["works","device","addition","unit"].
Review highlights
Reviews
CIP Cleaning heads
"I have tried several CIP spray balls over the years and until now have not found one that does both the Brewzilla and my Unitank, these little red spitfire are great, I have tow now so I can clean the Brewzilla and the Unitank at the same time."
Makes cleaning and sanitising a breeze
"This little unit is excellent. I hooked it up to a 12v pump and circulate PBW or sanitiser throughout my brewery. I attached it to some various pieces that can all be found at Kegland to connect it to a TC clamp."
Easy cleaning kit - Yes Please!
"looking forward to using this all the Youtube videos seem to do it justice. And for $12. came with the hose ready to swap it on to the recirc arm. Anything that makes cleaning a breeze is well worth the money!!"
Kettle cleaning
"I love this. Makes cleaning easy superb product"
Works fine, but. . .
"Rotor itself is perfect and gets the job done really well, but the provided silicone hose has wrong ID diameter - recirc arm on BZ has 13mm OD and this tube is also 13mm ID so it's a very loose fit and even with provided clip it's still not sealing properly. The recirc hose which came with BZ is ID 10, so I don't understand why they chose ID 13 here. If they went with ID 12 it would seal properly and still be easy to remove after cleaning. ."
Time saver
"Works surprisingly well. Let's me do other tasks whilst Brewzilla is cleaning itself."
Set and forget
"Makes for an easy clean at the end of brew day"
Great cleaning accessory - a no-brainer
"This little guy really helps to get the BrewZilla clean after a brew day. It works really well."
Bit wobbly
"When used on top of the brewzilla"