Deluxe Sodastream Cylinder Adapter (with pin adjustment)

Tired of losing gas every time you connect or disconnect your sodastream cylinder to your normal sodastream cylinder adaptor. This new design is what you need.

If you are looking for small convenient sized gas cylinders such as our 450gram Soda Cylinder that is compatible with this device then you can purchase that here.

Unlike our cheaper sodastream cylinder adaptors that you can find here, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use.

Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically.  Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself.  This is also a pain.  This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow.

This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don't want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system.

Ideal for the low volume user or someone who hasn't bit the bullet in a big cylinder. 
*does not include regulator or gas canister

If you need to change the o-rings on this device here is the instruction manual on how to do this.

Do you need a Sodastream Cylinder? We do sell our own version of cylinder that are compatible with the Sodastream Machines which you can see below:These are compatible with sodastream machines and also come full of gas.  So they are quite good value.  They are also much easier to fill than the Sodastream branded cylinders.  You can purchase these here.
It is imperative that you do not use thread tape on this fitting. It is designed to be used with the o-rings supplied.

There are two O-Rings in the pin piece of this adapter. 
O-Ring Size:  OD 7mm x 1.5mm 
Replacement pin o-rings can be purchased here
Replacement pins (with o-rings) can be purchased here