Super Sucker with 10mm Barbs - Siphon Pump - including Power supply
We're truly sorry that we had to discontinue this product. We understand it can be disappointing for our amazing customers, and we genuinely regret any inconvenience it may have caused.
Your support means the world to us, and we appreciate your understanding.
We may have replaced/upgraded this with a better alternative! Check the description below for more information.
Description
- Transfer beer, wine, cider andĀ spirits between vessels without the hassle of starting a siphon.
- Place your receiving vessel side-by-side or even above the transferring vessel.
- Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg.
- Reduce excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon.
Has been superseded by the more versatile KL24433 Super Sucker Pump with 1/2" BSP Male Thread Pumps.
Ā
The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer, wine, cider or spirits between vessels. Rack from the primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood.
Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold one.
With the Super Sucker you don't need gravity or CO2 pressure to move liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop.
The 10mm barbed inlet and outlet are perfect for use with our 10 mm ID x 15mm OD Heavy Duty Silicone Tube . Clamps suitable for this hose are the 16.5mm (suit 14-16mm OD) Stainless Stepless Clamps.
It is important to remember to clean thoroughly and store dry to avoid potential sites of infection. We would recommend flushing/recirculating with a diluted mix of StellarSan for at least 2 minutes of contact time prior to using this pump.Ā
Features:
Self-Priming
10mm Barbed Inlet/Outlet
On/Off Switch
Max Flow: 4.23 L/min
Suction: 127mm
Max Lift: 3.8m
Maximum Temperature: 60Ā°C
Pressure: 90 psi
Voltage: 12V DC (3.5A)
Power Cord Length: 1.2m
Power Adaptor Cord Length: 70cm
Power Switch Cord: 25cm
Suggested Videos
This product is rated 5.0 of 5.0 stars.
It has received 1 review.
This product is rated 5.0 of 5.0 stars.
It has received 1 review.
This product is rated 5.0 of 5.0 stars.
It has received 1 review.
This product is rated 5.0 of 5.0 stars.
It has received 1 review.
Special Brew?
We've saved you all the guess work and time, browse our selected special brew recipes and start your brewing journey.
Sounds great - take me there