Mill it in style with your new cold steel rollers with 6061 Aluminium chassis. Let the war begin with 2 rollers against 3 rollers. Here at KegLand if the Mill can crush, there are no losers.
Optional Upgrades:
KL09621 - Plastic (PP) 10mm Base Board for Grain Mill
This Malt Muncher is adjustable to get your grain bill crushed exactly the way you want it. 10mm crank shaft as standard, perfect for the entry level millers wanting to use a drill to keep rolling.
Or if you want a work out and look like a pro arm wrestling champion, a manual crank comes as standard just to get you going.
If you are going to be using a drill, don't go crazy with speed, you can risk cooking/burning your grain and impeding the mills performance. If at all possible just enough power to get it going and catching. This should fall around the 200rpm mark.
Take care not to get the rollers wet! Once you've finished milling brushing out your grain mill is the best way to clean.
Includes:
- Grain hopper (2.7kg capacity) - Comes with protective blue film. Remove before assembling.
- Manual Crank handle
- 10mm crank shaft
- Roller adjustment knobs
- Reinforced chassis with pre aligned mounting holes for perfect stability if mounting to a board.
12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging.
Please note: If you wet condition your grains, you run the risk of prematurely rusting your knurled rollers. It is best to mill dry and clean with compressed air periodically.
These units have been designed for Malted Barley, Wheat & Rye.
We do not take returns for mis-use outside of these parameters.
