Spunding valve kit
"Brilliant product! Absolute game changer when switching to pressure fermenting. Just don't assemble the spunding valve backwards like I did! I accidentally took my all rounder to 40psi"
Integrated Gauge BlowTie Kit (0-15psi)
$18.35 AUD
Skip to product information
In stock
Integrated Gauge BlowTie Kit (0-15psi)
KB03529
$18.35 AUD
Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas)
This kit has been designed for simplicity and ease of putting together.
This Kit Contains:
1 x KL15042 BlowTie Spunding Valve Gen 2 with 0-15psi Integrated Gauge
1 x KL20756 duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas)
1 x KL18012 Rigid 8mm Plastic Joiner
All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.
This BlowTie unit can be easily disassembled for cleaning using a Phillips head screw driver.
Designed to suit 8mm (5/16") Evabarrier Tubing. It's compatible with both the 4mm ID Tubing here or 5mm ID here.
Specifications:
1. Suits pressures 0-15psi (but with different gauges the unit can go above 100psi)
2. Made from food-grade acetal
3. Stainless screws
4. 8mm (5/16") push on both sides
This video will give you some information on how the Blowtie 2 works and how to mount it. The video also covers the inline regualtor at the same time. The inline requlator can be purchased here.
We have a video on the Blowtie 1 unit here below. The product is the predecessor but it will help to give you an idea how this product works:
If you would like to know how this spunding valve differs from other spring type spunding valves then you can see the videos below:
If you are looking for a compact digital gauge with backlight illumination click here. This should only be used on a blowtie if you have excess tubing to stop liquid reaching the gauge. If liquid enters the digital gauge it will break.
Product Downloads
You may also like
Overall rating: 4.9459457 / 5 from 37 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["quality","kit","solution","unit","device","tool","works","fermenter","format","joiner"].
Review highlights
Reviews
Great quality just what the doctor ordered
"Cost effective, work perfectly,"
Blow tie
"A fantastic little device, great quality, how do you do it for the price!"
Pressure ferment
"Great product easy to use much less fiddly than my old brass one"
good quality
"Third, I have bought, that says enough."
All good. Really happy
"All good. Really happy"
Ripper
"Does what it says on the box. Simple build and install."
Must have for pressure fermentation
"Very accurate and easy to use with the 0-15 psi gauge. Must have for pressure fermentation. I run a blow-off-tube into a container of sanitiser because I like to see it bubble like an airlock during active fermentation"
Integrated Gauge BlowTie Kit
"This ois a very compact kit that does the job acuratly and is easily adjustable on the go."
Cheap and cheerful
"Great for such a tiny unit"
Q&A
- My gauge keeps jumping... one min te it's telling its 12psi then I tap it and it goes back to 6psi. I'm trying to use it the maintain a co2 press of 10 to 12psi in my fermenter. I've set the reg ulator to 10psi off my mt pressurised keg,then attached it to my fermenter. The gauge moved up to 15psi,so I pulled the release pin and droped the pressure f my fermenter to under 10psi. I went back 30 min later and the gauge was back at 12psi Does this mean I've got a problem or a faulty sounding valve
- These are pretty simple and therefore super reliable. Pressure will vary for a bunch of reasons such as ambient temperature changes. If you are concerned, please shoot through a video!