6m Roll of Heavy Duty Silicone Tube - (12.5mm ID x 18.5mm OD)

Ideally suited to setting up a brewery. This 1/2inch hose size is commonly used for breweries up to 200L in size. Compatible with BrewZilla Breweries and various other fittings such as camlock fittings and 1/2 inch nipples/barbs.

Key Features:
- Heavy Duty
- High Temperature Resistance over 200°C
- Food Grade
- Kink Resistance

Clamps suitable for this hose being attached to a 13mm barb are the:
KL06736 - Bag of 20 x 20.5mm S.S. Stepless Clamps(suit 17-20mm OD)

This silicone hose is resistant to constant high temperatures (over 200°C) and has good chemical resistance.
The soft silicone is easy to work with and seals very well.

The soft silicone is great for transferring beer from fermenter to keg and will fit onto the standard fermenter tap or standard 13mm hose barbs.

It is also recommended for handling spirits and for distillation applications as it does not leach plasticisers like vinyl tubing. 

Internal diameter is 12.5mm and outside diameter of 18.5mm. 

Note: This hose should not be used for higher pressures above 20psi (such as mains water pressure). The hose has a burst pressure of approximately 35psi.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy