Not a fermzilla dump valve upgrade
"Incorrectly described as the upgrade from the screw on collection jar, in fact not an upgrade Product is incompatible with fermzillas with screw on collection jars"
Gen3 to Gen3.1 Tri-Conical Collection Container Upgrade Kit
$34.90
Skip to product information
In stock
To upgrade your FermZilla Tri-Conical 1000mL Threaded collection container to the Generation 3.1 600mL x 3 Inch Tri-Clover you will need this kit.
Instructions:
1. Unscrew the 6 x Bolts with a 5mm Allen Key from your current Tri-Conical Butterfly Valve. There will be a washer for each nut, try not to lose it!
2. Peel apart the butterfly valve, having the 1000mL Collection container attached makes this part a little bit easier as you'll have more to grip onto.
3. Once apart put aside the 2" Section and replace with the 3" Section. Take note of the orientation as there are grooves to show which direction the butterfly gate can go.
4. Screw Back together, tightening a little bit by little bit in sequence. Overtightening may cause the nut to round out the plastic, be careful.
Gen3 to Gen3.1 Tri-Conical Collection Container Upgrade Kit
KB21409
$34.90
Instructions:
1. Unscrew the 6 x Bolts with a 5mm Allen Key from your current Tri-Conical Butterfly Valve. There will be a washer for each nut, try not to lose it!
2. Peel apart the butterfly valve, having the 1000mL Collection container attached makes this part a little bit easier as you'll have more to grip onto.
3. Once apart put aside the 2" Section and replace with the 3" Section. Take note of the orientation as there are grooves to show which direction the butterfly gate can go.
4. Screw Back together, tightening a little bit by little bit in sequence. Overtightening may cause the nut to round out the plastic, be careful.
You may also like
Overall rating: 3.0 / 5 from 2 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Much better than the old
"Much better than the old screw on collection container. Easier to use."