duotight - 6.35mm (1/4inch) Joiner

duotight Fittings for use on gas and liquid applications.

Operate by pushing the tubing in to engage and pulling the collet back to disengage. Used for carbonation caps, tap shank accessories and any inline regulators that have a 1/4" 6.3mm fitting.

Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Compatible with our 
- KL25331 EVABarrier 3mm ID x 6.35mm OD x 12m Roll - Double Wall EVA
- KL11143 PE Water 4mm (5/32inch) ID x 6.3mm(1/4inch)OD - 10m Roll

No clamps necessary! 
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy