Digital Heating Mat with Power Control (25 Watts)

Dimensions:
345mm x 250mm

Cords:
AU Plug with 1m cable to controller
Probe with small sunction cup 1.9m cable to controller
Controller with 0.9m cable to heating mat

Instructions - Setting Temperature
1. Press the power button to turn the device on/off.
2. To set the temperature press the "up" and "down" arrows to increase or decrease the set temperature.

Instruction - Change C (Celsius) to F (Farenheight)
1. Press the set ↵ button to alternate between until the units change from C to F.

Instructions - Change Power Level
1. Press the ↵ button until you see L01.
2. Once the L01 is displayed press "up" and "down" arrows until the desired percentage is reached.
L01 = 10%
L02 = 20%
L03 = 30%
L04 = 40%
L05 = 50%
L06 = 60%
L07 = 70%
L08 = 80%
L09 = 90%
L10 = 100%

Instructions - Timer Function
1. Press the ↵ button until you see 0H.
2. Change the 0H setting using the "up" and "down" arrows to increase from 0H to 24H.
During this mode the heating will stay on until the a certain number of hours elapses.
For instance if you set 5H then the controller will turn on for 5 hours and will then the heating function will turn off.
When in timer mode the power button will flash on and off. When the XH time has finished the heating will turn off and the whole screen will flash on and off to indicate the timing cycle has completed.
Note: 0H = On all the time.

WARNINGS
NOT INTENDED FOR OUTDOOR USE
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS
KEEP AWAY FROM CHILDREN
AVOID DIRECT SUNLIGHT
AVOID CONTACT WITH ANYTHING HIGHER THAN 60°C
DO NOT DISSASSEMBLE. IF THIS PRODUCTS APPEARS BROKEN OR FAULTY CONTACT CUSTOMER SUPPORT OR DISPOSE OF ITEM AND DO NOT USE THE DEVICE.