great product
"I've only used this once but had great results so far, with the ability to purge and fill bottles will help me in comps"
Stainless Tee Type Counter Pressure Bottle Filler
$49.95
Skip to product information
Out of stock
Stainless Tee Type Counter Pressure Bottle Filler
KL01243
$49.95
This product has been superseded by the fantastic KL21760 NukaTap Counter Pressure Bottle Filler
Check out the video on the product page to see how it stacks up!
Can fill most PET soft drink bottles and many types of glass bottles.
Counter Pressure Bottle Filler Kit
Have you ever wanted to take some of your keg brew with you to a mates house? Now you can with the KegLand Counter Pressure Bottle Filler.
This type of bottle filling technology is normally only accessible to large breweries but now the same counter pressure filling techniques can be used at home so you can fill you bottle of beer right from the keg to bottle with no exposure to oxygen, and without losing any carbonation, or loss of beer through fobbing.
It will fit most PET soft drink bottles and many types of glass bottles.
Features:
- Foam free pulling from the keg to bottle
- Bleed valve to purge CO2 from the bottles that you fill
- Font mountable
- 6.35mm (1/4") duotight compatible barb for CO2 inlet
- 6.35mm (1/4") duotight compatible barb for beer inlet
- 6.35mm (1/4") duotight compatible barb for Blow off valve
The Counter pressure bottle filler is compatible with 6.35mm Duotight fittings allowing easy attachment to 8mm EVABarrier hosing using a 6mm x 8mm reducer (KL07481) sold seperately.
Alternatively the duotight compatible barbs can be removed and replaced with liquid and gas ball lock posts with 1/4 inch BSP bulkhead assembly (KL03179 and KL03162) sold seperately. This allows the counter pressure bottle filler to be quickly connected to and disconnected from your existing kegging system.
Product Downloads
You may also like
Overall rating: 4.6 / 5 from 5 reviews.
AI Generated Review Summary
Summary topics
Review topics: [tube, bottle].
Review highlights
Reviews
So cool
"Excellent product. Make sure your bottles are frozen or cold and read the instructions to know where off is on the main tap (middle) otherwise you will get beer everywhere. Ask me how I know…"
Bit tricky to use
"Bit tricky and a real pain to get the barb bits off. They stock one that?s duotight compatible now so should sell it and get one"
Good but filler tube too long
"I like the counter pressure filler - finally no fobbing when filling my bottles. However, the filler tube is too long for my standard 330ml beer bottles. When it rests on the bottom of the bottle, the bung doesn't seal the neck. Had to take my Dremel tool to it to cut a bit off. Would be better with a shorter tube that could be lengthened if needed with a bit of plastic tubing."
Works great
"Very easy to use. Process of bottling made simpler. Must say that it donot waste my beer."