6kg CO2 Gas Cylinder (FULL)

Our 6kg CO2 Gas cylinders come full. With a cylinder shut off valve this larger tank can dispense up to 1000L and carbonate and dispense up to 500L of beer.

Want to know where you can get refills of our CO2 Gas cylinders?  Look at our distributors map here: Refill Locations Map

Every month we have more new refill stations added to the map.  If you hear of any that are not on this map just let us know and we will also add them to this map.

Features:

• Australian Standard Approved
• Holds 6kg of CO2 when full
• Dimensions 75cm high x 16cm diameter
• Black carry handle grip for easy of transport and protection of valve

Please note this will not fit inside a Series X Kegerator. Only the 2.6kg Cylinder can fit inside with three 19L Kegs.
Please note this will not fit inside a Series 4 Kegerator. Only the 2.6kg Cylinder can fit inside with two 19L Kegs.

KegLands Swap & Go Price:

2.6kg: $20
6kg: $40

Instructions

Prior to use

We strongly suggest testing your connections prior to leaving the cylinder on. 
To do this watch our video here OR read below

1. Disconnect the gas side of your set up from your kegs.
2. Turn on the gas using the knob the cylinder valve.
3. Turn the regulator knob clockwise until the low pressure side reaches 40psi
4. Turn off the cylinder valve at the top of the bottle.
5. Wait 2+ Hours (or leave overnight) 
   

If the left and right pressure gauge on the regulator has dropped or is showing 0psi. Then it is safe to say you have a leak somewhere in the line. You will need to check all connections with soapy detergent water to locate the leak.

We recommend checking all clamped sections, or if you’re using push in fittings, to ensure they’re not bending or being stretched as this will cause a micro leak.

Please note this item cannot be sent with Australia Post.

Warning: Only use in the upright position. Or you run the risk of breaking your regulator with liquid CO2

Hydro Testing

Unlike some other alloy steel cylinders, the KegLand gas cylinders are made with a RPV fitting into the valve opening.  As a result our cylinders only require 10 years periodic hydro testing not 5 year like other silimare cylinders.  This can be seen in the AS2030 standard here: 10 Year Periodic Testing Interval.  When this cylinder eventually requires a hydro test you can swap it with another cylinder in our exchange program in which case we absorb the hydro test cost at our premises in Noble Park or alternatively take it into a hydro testing facility to get the test done.

Want to know where you can get refills of our CO2 Gas cylinders?  Look at our distributors map here: Refill Locations Map

Every month we have more new refill stations added to the map.  If you hear of any that are not on this map just let us know and we will also add them to this map.