35L BrewZilla Gen 3 - 3.1.1 - PPSU Sight Glass Upgrade Kit

This upgrade kit suits 35L BrewZilla Gen 3 to 3.1.1 breweries. This will enable you to see the liquid level through the incredibly strong and crack resistant PPSU sight glass. This can be quite handy when you're sparging to a known level as the malt pipe would normally be sitting on top of the halo ring making it difficult to see the liquid level from the indentation markings inside the BrewZilla.

Please note there is some rotation issues with this upgrade. To avoid the tubing rotating with the camlock, we would suggest using a piece of cardboard or cloth where the tubing meets the saddle holding the tube down to the brewery. This friction will reduce the amount of twisting the tubing can do.

As this is a one size fits all approach to sight glasses for multiple models and sizes, you will need to cut down the 100cm tubing based on your current BrewZillas recirculation arm size. We would recommend purchasing a KL14557 Mini Tube / Pipe Cutter to cut the tube cleanly.
We have a video attached down below showing you how to measure and install this on a BrewZilla.
Please note you will need to re-use the Female x 1/2" Female Camlock on your recirculation arm with this kit. Do not dispose of it prematurely!
You will also need plumbers KL10888 Teflon tape or food grade loctite for the female camlock x female 1/2" fitting.

If you need replacement o-rings for your PPSU sight glass please see -> KL33824 (4 Pack) BrewZilla PPSU Sight Glass O-Ring Kit (please note these are only sold in four packs)

Includes:
1 x KL33800 Brewzilla Sight Glass PPSU Tube - 100cm (ID13mm x OD15mm)
1 x KL33817 Brewzilla Sight Glass Stainless Steel Connection Kit (Ball valve & Elbow)
1 x KL33770 BrewZilla - PPSU Sight Glass Graduation Sticker 35L (5-28L ~ 2-7gallons)
1 x KL17114 - (Tubing Saddle Piece is Used) from the Brewzilla 35L &65L - Polycarbonate Sight Glass Kit 390mm (FREE)

Please note: You will not be able to use the Gen 4 Female x Male Camlock with the red handle in this kit. That is for Gen 4 users going to Gen 4.1. Unfortunately just the female piece at the bottom that is needed is not sold separately.

Special thanks to A.Green for his support with this product.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy