2 Inch TC RIMS Element and Housing (6kw)

Special Order Only
This product is a special order item. If you would like this product you need to contact our staff.  You will need to order and pay for this item and will take 8-12 weeks to get completed for you.

This is a 2" Tri-Clover Recirculating Infusion Mash System (RIMS). Capable of maintaining a 200L+ free-flowing mash without scorching. Designed to be used with the KegLand 200L 3 Vessel BrewZilla.

This product is to be installed by a trained professional or electrician as it needs to be wired manually or potentially risk warranty.

1. Proper Use & Unattended Operation

The RIMS (Recirculating Infusion Mash System) is an external heating tool located at the base of the unit. It is designed for active circulation during the brewing process.

• Warning: We strictly do not recommend using the RIMS for unattended overnight heating. Automated heating without supervision can lead to dry-firing, equipment damage, or a safety hazard if a leak or pump failure occurs.

2. Standard Operating Procedure (SOP)

To ensure the longevity of the heating element and the integrity of the sight glass, always follow this specific sequence:

RIMS Startup (ON):

1. Open Valves: Ensure all valves in the RIMS pipeline loop are fully open.
2. Engage Pump: Turn the pump on first.
3. Verify Flow: Visually confirm through the sight glass that the tube is completely full and liquid is flowing steadily.
4. Power Heater: Only once flow is confirmed should you turn the RIMS heating element on.

RIMS Shutdown (OFF):

1. Power Off: Turn the RIMS heating element off.
2. Thermal Cool-Down: The element retains significant residual heat even after power is cut. Keep the pump running for 2 to 4 minutes to circulate liquid and cool the element.
3. Power Off Pump: Turn the pump off only after the cool-down period.
4. Close Valves: Secure the pipeline valves.

3. Maintenance & Pre-Flight Inspection

The RIMS assembly is designed to be independently removable for deep cleaning and inspection (simply close the two isolation valves to detach the pipe assembly).

• Inspection: Before every use, inspect the sight glass for chips, cracks, or stress marks. Do not operate if any damage is detected.
• Cleaning: The heating element and internal pipe walls must be clean and free of "beer stone" or organic buildup to prevent localized overheating.
• Y-Strainer Maintenance: The BrewZilla 400L includes a pre-installed Y-type filter before the RIMS intake. You must remove and clean this filter before and after every brew session. A clogged filter will reduce flow rates, causing the RIMS to overheat and potentially damaging the element or sight glass.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy