1.5 Inch TC (38mm ID) FlexiRoyal EPDM Brewery Hose - 15m

KegLand now makes quality brewery hoses that are pre-assembled with tri-clover fittings at certain lengths.  
Because we are able to manufacture these in bulk, we are then able to more competitively drive down price and pass those savings onto you and your business.
If you do require custom length hosing that are swaged specifically to your requirements, please contact flexiroyal@kegland.com.au

Physical Robustness and Wide Temperature Range
We use multilayer, kink and crush resistant suction and discharge rubber hoses that can handle the demanding applications that exceed the highest food grade standards.  These hoses can handle temperatures as low as -32C and up to 121C.

Chemical Resistance & FDA & USDA Approved
These hoses are made specifically to handle the harsh chemicals and temperatures used in CIP systems.  Chemicals including Acid, Caustic, Acetic, High Sulfur, Lactic, Phosphoric have all been tested on these hoses to ensure your hose not only works great on day one but many years into the future without degradation.  These hoses are FDA & USDA approved and comply with 3A Sanitary Standard 18-03 which makes the hoses suitable for beer and many other industries such as pharmaceutical and wine.

Low Oxygen Transmission
Unlike cheaper silicone hoses, these hoses are made from nitrile polyvinyl chloride blend that have a much lower oxygen transmission rate.  This is something that is frequently overlooked in brewery hardware and will ensure your beer stays fresher for longer.

Large & Smooth Bore for High Flow
These hoses are made to the with maximum bore diameter so you can achieve highest throughput.  The large bore is more expensive to manufacture but will literally pay for itself in saved time due to the higher flow rates.  The smooth swaged ends are made without internal bulging so the entire hose drains well and CIP cleans without hidden cracks for crud to hide.  The large bore also makes these hoses suitable for viscous substances like liquid sugar, yeast cake, hop sludge and other liquids with solids mixed in.

First Use Instructions:
FlexiRoyal EPDM Brewery Hosing requires at least three CIP recirculation's to remove any residual aromas left over from the manufacturing process that could pass through to the beverage. 
We strongly believe the trade off for recirculating a few times in your cleaning cycle to then have a much higher chemically resistant hosing that can handle stronger accidental chemical misuse to be extremely valuable for a growing business.

SPECIFICATIONS
Tube Material: White nitrile polyvinyl chloride blend ( approved by FDA/USDA and complies with 3A Sanitary Standard 18-03)
Tri-Clover Material: 304SS
Cover: Royal Blue nitrile polyvinyl chloride blend
Reinforcement: Synthetic fiber helix with helically galvanized metal wires
Temperature: -32℃ and up to 121℃
Application: This hose is a very flexible hose that can be used to transport oily or non-oily food in trucks and factory equipment under the condition of gravity, pressure, or suction device
Working Vacuum: 737 (mmHG)
Working Pressure: 10bar (@ 121C max temp)
Minimum Bending Radius: 102mm

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy