Brewzilla

92 products

Due to the concave bottom and central draining hole, the wort being recirculated through the pump will pass through the malt pipe and then down through the boiler false bottom. The wort would normally then follow the path of least resistance, making a b-line for that drainage hole.

What this Heat Exchanger Dish does is force that recirculating wort up to the edge of the BrewZilla base and pass over the elements for a longer period, this then aids in faster heating exchange with the wort, which can help you on a brew day reach those temperatures much quicker.

100L BrewZilla Gen 4 - Heat Exchanger Dish (HED)

$49.45

The largest single vessel home brewery in the BrewZilla range, Powered by 32a Single Phase or 10a Three Phase when installed by a qualified electrician.

The largest single vessel home brewery in the BrewZilla range, Powered by 32a Single Phase or 10a Three Phase when installed by a qualified electrician.

100L BrewZilla Gen 4 with 25w Pump 2200w/2200/2200w - 220-240V AC

$1,349.00

Suitable for 35L and 65L BrewZillas Gen 4's and 65L DigiBoils. The feet of those brewing systems slot into the grooved on the dolly plate to make moving your brewery around a breeze. Lock your brewery in place with two locking wheels.

35L & 65L 50cm - Heavy Duty BrewZilla Dolly Bundle

$109.95

Suitable for 35L and 65L BrewZillas and DigiBoils. The feet of those brewing systems slot into the grooved on the dolly plate to make moving your brewery around a breeze. Lock your brewery in place with two locking wheels.

Please take note that the bolts are pushed through from the bottom, not top down.

35L & 65L 50cm - Low Profile BrewZilla Dolly Bundle

$69.90

35L + 65L BrewZilla Gen 3.1.1 - Extension Rod for Malt Pipe - KegLand

35L + 65L BrewZilla Gen 3.1.1 - Extension Rod for Malt Pipe - KegLand

35L + 65L BrewZilla Gen 3.1.1 - Extension Rod for Malt Pipe

$9.95

If you currently own a 3.1 unit all you will need is the LCD Control Panel. You will not need a new PCB Board (Power Board)

35L + 65L BrewZilla Gen 3.1.1 - LCD Display Screen

$24.95

If you are replacing a Gen 3.1 board (but do not wish to upgrade as well) then you will just need this board.

35L + 65L BrewZilla Gen 3.1.1 - Main Circuit board

$24.95

Replacement overflow cone for BrewZilla Gen 3.1 in both 35L and 65L versions

Replacement overflow cone for BrewZilla Gen 3.1 in both 35L and 65L versions

35L + 65L BrewZilla Gen 3.1.1 - Stainless Recirculation Cone Piece

$12.95

35L + 65L BrewZilla Gen 3.1.1 - Threaded Rod For Malt Pipe - KegLand

35L + 65L BrewZilla Gen 3.1.1 - Threaded Rod For Malt Pipe - KegLand

35L + 65L BrewZilla Gen 3.1.1 - Threaded Rod For Malt Pipe

$9.95

Recirculate with ease with the Male to Female Camlock Extender!

35L + 65L Brewzilla Gen 4 + 3.1.1 - Recirculation arm Extension (Stainless steel including the Camlock)

$21.95

35L + 65L Brewzilla Gen 4 + 3.1.1 - Thermal Cut Out Circuit Breaker 175C (230V) - KegLand

35L + 65L Brewzilla Gen 4 + 3.1.1 - Thermal Cut Out Circuit Breaker 175C (230V) - KegLand

35L + 65L Brewzilla Gen 4 + 3.1.1 - Thermal Cut Out Circuit Breaker 175C

$9.95

This jacket makes a significant difference when comparing the efficiency of the Robobrew units and it’s a jacket that will pay itself off in energy saving so it's a good opton to any new Robobrew User.

This jacket makes a significant difference when comparing the efficiency of the Robobrew units and it’s a jacket that will pay itself off in energy saving so it's a good opton to any new Robobrew User.

35L - Jacket for BrewZilla Gen 3.1.1 (Neoprene Parka)

$18.00

35L BrewZilla Gen 3 - Bottom Screen for Malt Pipe with threaded socket - KegLand

35L BrewZilla Gen 3 - Bottom Screen for Malt Pipe with threaded socket - KegLand

35L BrewZilla Gen 3 - Bottom Screen for Malt Pipe with threaded socket

$14.95

35L BrewZilla Gen 3 - Boiler False Bottom (pump filter) - KegLand

35L BrewZilla Gen 3 - Boiler False Bottom (pump filter) - KegLand

35L BrewZilla Gen 3 - Boiler False Bottom (pump filter)

$18.95

Sold out

35L BrewZilla Gen 3 - Bottom Fine mesh screen

35L BrewZilla Gen 3 - Bottom Fine mesh screen

$14.95

This is a replacement bottom support plate for the BrewZilla 35L model. It can also be used on the Digiboil 35L.

35L BrewZilla Gen 3.1.1 - Base with Rubber feet

$19.95

Sold out

35L BrewZilla Gen 3.1.1 - Malt Pipe - KegLand

35L BrewZilla Gen 3.1.1 - Malt Pipe

$59.99

If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that!

35L BrewZilla Gen 3.1.1 - Pro Series Bottom Screen for Malt Pipe (no overflow hole)

$19.95

35L BrewZilla Gen 3.1.1 - Pro Top Screen for Malt pipe (no overflow hole) - KegLand

35L BrewZilla Gen 3.1.1 - Pro Top Screen for Malt pipe (no overflow hole) - KegLand

35L BrewZilla Gen 3.1.1 - Pro Top Screen for Malt pipe (no overflow hole)

$14.95

35L BrewZilla Gen 3.1.1 - Reinforced False Bottom (pump filter) - KegLand

35L BrewZilla Gen 3.1.1 - Reinforced False Bottom (pump filter) - KegLand

35L BrewZilla Gen 3.1.1 - Reinforced False Bottom (pump filter)

$18.95

Made from food grade silicone. Temperature Resistant to 180C.
This is a replacement silicone elbow bend. This part joins the pump to the inlet on the base of the BrewZilla then to the outlet of the pump to the recirculation arm on the side of the BrewZilla.

35L BrewZilla Gen 3.1.1 - Right Angle Elbow Silicone Tube Elbow

$9.95

35L BrewZilla Gen 3.1.1 with Pump 1900/500w - 220-240V AC - KegLand

35L BrewZilla Gen 3.1.1 with Pump 1900/500w - 220-240V AC - KegLand

35L BrewZilla Gen 3.1.1 with Pump 1900/500w - 220-240V AC

$350.00

The all new 35L BrewZilla boiler extension that allows 12L headroom.

Turn that 35L BrewZilla into a 47L behemoth!

35L BrewZilla Gen 4 + 3.1.1 - 12L Boiler Extension (Stainless steel)

$49.95

35L BrewZilla Gen 4 + 3.1.1 - Glass Lid (without handles) - KegLand

35L BrewZilla Gen 4 + 3.1.1 - Glass Lid (without handles) - KegLand

35L BrewZilla Gen 4 + 3.1.1 - Glass Lid (without handles)

$19.95

35L BrewZilla Gen 4 + 3.1.1 - Recirculation arm - KegLand

35L BrewZilla Gen 4 + 3.1.1 - Recirculation arm

$35.45

The all new 35L BrewZilla boiler extension that allows 12L headroom.

35L BrewZilla Gen 4 + 3.1.1 - Silicone Seal for 12L Boiler Extension

$14.95

Sold out

Sold with the BrewZilla Range, these compact immersion chillers are great for chilling wort up to 35L down to pitching temperature.

35L BrewZilla Gen 4 + 3.1.1 - Stainless Steel Immersion Chiller

$49.95

35L BrewZilla Gen 4 + 3.1.1 - Wire Malt Pipe Support (halo ring) - KegLand

35L BrewZilla Gen 4 + 3.1.1 - Wire Malt Pipe Support (halo ring)

$14.95

Please note: These are slightly looser to fit. Meaning it will be easier to remove from your BrewZilla.

Please note: These are slightly looser to fit. Meaning it will be easier to remove from your BrewZilla.

35L BrewZilla Gen 4 - Concave Boiler False Bottom (pump filter with Eye Bolt Assemblies)

$29.95

This is a replacement malt pipe for the 35L BrewZilla Gen 4. It is not suitable to be used with the current 35L DigiBoils.

This is a replacement malt pipe for the 35L BrewZilla Gen 4. It is not suitable to be used with the current 35L DigiBoils.

35L BrewZilla Gen 4 - Malt Pipe

$89.95

This is a replacement malt pipe handle for the 35L BrewZilla Gen 4 units, it has been upgraded from 8mm thick steel to a whopping 10mm thickness.

Digital caliper measuring a metal rod on a white background

35L BrewZilla Gen 4 - Malt Pipe Handle (10mm Thick)

$13.95

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

35L BrewZilla Gen 4 - Neoprene Jacket / Parka (with recirc arm cover)

$24.95

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 180°C

35L BrewZilla Gen 4 - Silicone Pump Tubing Kit

$19.95

Specifically designed for maximum strength and rigidity. Now with the added BlueTooth RAPT Temperature Probe Port for monitoring and controlling your BrewZilla Gen4.

35L Brewzilla Gen.4 - Replacement Top Screen for Malt pipe (Probe Hole)

35L BrewZilla Gen 4 - Top Screen for Malt pipe (Probe Hole)

$19.95

Get yourself a fully featured home brewing brewery that will allow you to make beer, whiskey, gin, and many other products more efficiently than ever with wifi control.

Get yourself a fully featured home brewing brewery that will allow you to make beer, whiskey, gin, and many other products more efficiently than ever with wifi control.

35L BrewZilla Gen 4.1 with Pump 1900/500w - 220-240V AC

$619.95

This the upgraded malt pipe for the BrewZilla 35L model when you add the 12L Boiler Extension.

It does not come with an extra Halo Support Ring, you will need to either purchase one if you are using a DigiBoil 35L + Extension

35L BrewZilla Gen4 + 3.1.1 - Extended Malt Pipe for Boiler Extension

$75.95

35L Distillation Lid (60mm Hole) FOR TURBO BOILER/ROBOBREW - KegLand

35L Distillation Lid (60mm Hole) FOR TURBO BOILER/ROBOBREW

$18.45

35L Distillation Lid with (47mm Hole) for AlcoEngine RoboBrew Turbo Boiler - KegLand

35L Distillation Lid with (47mm Hole) for AlcoEngine RoboBrew Turbo Boiler - KegLand

35L Distillation Lid with (47mm Hole) for AlcoEngine RoboBrew Turbo Boiler

$14.95

Sold out

35L G1 Silicone Gasket for Distillation Lid - Suits BrewZilla / DigiBoil - KegLand

35L G1 Silicone Gasket for Distillation Lid - Suits BrewZilla / DigiBoil - KegLand

35L G1 Silicone Gasket for Distillation Lid - Suits BrewZilla / DigiBoil

$9.95

35L Heavy Duty False Bottom for DigiBoil and BrewZilla - KegLand

35L Heavy Duty False Bottom for DigiBoil and BrewZilla - KegLand

35L Heavy Duty False Bottom for DigiBoil and BrewZilla

$69.95

The feet of those brewing systems slot into the grooved on the dolly plate to move your brewery around.

Suitable for 65L and 100L BrewZillas and DigiBoils. The feet of those brewing systems slot into the grooved on the dolly plate to make moving your brewery around a breeze

65L & 100L 60cm - Heavy Duty BrewZilla Dolly Bundle

$131.75

65L - Jacket for BrewZilla Gen 3.1.1 (Neoprene Parka) - KegLand

65L - Jacket for BrewZilla Gen 3.1.1 (Neoprene Parka) - KegLand

65L - Jacket for BrewZilla Gen 3.1.1 (Neoprene Parka)

$24.95

65L AlcoEngine Distillation Lid with (47mm hole) for Robobrew/BrewZilla/Digiboiler - KegLand

65L AlcoEngine Distillation Lid with (47mm hole) for Robobrew/BrewZilla/Digiboiler - KegLand

65L AlcoEngine Distillation Lid with (47mm hole) for Robobrew/BrewZilla/Digiboiler

$32.95

65L BrewZilla Gen 3.1.1 - Bottom Screen for Malt Pipe (threaded socket) - KegLand

65L BrewZilla Gen 3.1.1 - Bottom Screen for Malt Pipe (threaded socket) - KegLand

65L BrewZilla Gen 3.1.1 - Bottom Screen for Malt Pipe (threaded socket)

$24.95

65L BrewZilla Gen 3.1.1 - Malt Pipe - KegLand

65L BrewZilla Gen 3.1.1 - Malt Pipe

$59.99

Sold out

65L BrewZilla Gen 3.1.1 - Malt Pipe Handle (8mm Thick) - KegLand

65L BrewZilla Gen 3.1.1 - Malt Pipe Handle (8mm Thick) - KegLand

65L BrewZilla Gen 3.1.1 - Malt Pipe Handle (8mm Thick)

$15.00

65L BrewZilla Gen 3.1.1 - Top Screen for Malt Pipe - KegLand

65L BrewZilla Gen 3.1.1 - Top Screen for Malt Pipe - KegLand

65L BrewZilla Gen 3.1.1 - Top Screen for Malt Pipe

$22.00

65L BrewZilla Gen 3.1.1 with Pump - (3500w) 220-240V AC - KegLand

65L BrewZilla Gen 3.1.1 with Pump - (3500w) 220-240V AC - KegLand

65L BrewZilla Gen 3.1.1 with Pump - (3500w) 220-240V AC

$480.00

65L BrewZilla Gen 4 + 3.1.1 - Stainless Steel Immersion Chiller - KegLand

65L BrewZilla Gen 4 + 3.1.1 - Stainless Steel Immersion Chiller - KegLand

65L BrewZilla Gen 4 + 3.1.1 - Stainless Steel Immersion Chiller

$79.95

65L BrewZilla Gen 4 + 3.1.1 - Glass Lid (without handle) - KegLand

Replacement Glass Lid for Brewzilla - With Measuring Tape

65L BrewZilla Gen 4 + 3.1.1 - Glass Lid (without handle)

$24.95